West Asia Trading & Engineering Pte Ltd

Importers, Exporters, Engineering Works, Manufacturers Representative & Commission Agent

No. 1 Kim Keat Lane Singapore 328858  Tel: +(65) 6250 5676  Fax: +(65) 6252 9890

E-mail: westasia@singnet.com.sg

 

 

 

    CLARE

    Electrical Safety & Conformance Test Equipments

 

 

*  Hipot/Flash/Dielectric Withstand Testers

*  Hire Sector Testers

*  Testers for the Lighting Industry

*  Wiring Analysers

*  Ground/Earth Bond Testers

*  Test Enclosures

 

Clare Instruments provide a range of electrical safety testing equipment to help manufacturers of electrical and electronic products meet international and product specific conformance standards such as the LVD and CE mark. Clare's technical expertise in electrical safety testing is also combined with considerable engineering and system integration skills.

Used extensively throughout the world, Clare test equipment typically perform Hipot / Flash Testing, Dielectric Withstand, Earth / Ground Bond Testing and Leakage, Performance Testing which are essential to ensure compliance to LVD, CE and all international standards. Clare also offer Wiring Analysers and component testers in addtion to a wide range of electrical safety accessories.

Clare products can be found extensively throughout the domestic appliance (white goods), lighting, industrial machinery, electrical component, HVAC, audio visual, IT, power tool, aerospace, and cable and harness manufacturing industries.

 

 

Hipot / Flash / Dielectric Withstand Testers

 

 

Elite 9024 & Elite 9024V Electrical Safety & Conformance Tester

·     Meets national and international regulations on electrical safety testing

·     All-in-one Electrical Safety Tester including load test capability

·     Powerful PC software for complete automatic control

·     Statistical analysis (SPC) and result traceability

·     Generate test sequences locally or from PC

·     Simple straightforward user interface with single button operation

·     Powerful I/O allowing control of external devices

·     Can act as PLC controller

·     Can be network connected

·     Test results can be loaded directly into MSAccess/Excel

·     Can be remote controlled via RS232

 

 

 

SafeTest Manufacturing Tester

·     Optimised user interface to simplify setup towards the Manufacturing environment

·     Provides correct flash/hipot test for CE and international product test compliance

·     Flash/hipot test delivers up to 10mA of leakage

·     Full traceable test results, logged with real-time data and user

·     Semi-automatic test sequences can be created to speed up test process

·     Rugged ergonomic case

·     Large high contrast graphic display

·     Compatible with PATGuard software

·     Barcode scanner or QWERTY keyboard can be used for entry of product serial number, test codes, and user details

·     Barcode scanner can be used to automate test process

·     Manual test mode facility for diagnostic testing

·     Complies with EN 50191, has beacon and safety guard circuit

·     Can be used with a generic printer, or Desk TnT label printer

·     Dual function test output of 230 and 120 Volts, allows products to be tested for different geographic regions

·     Flexible password protection incorporated within system configuration

 

Flash / Hipot Testers

 

 

HAL Flash/Hipot Tester

·     Advanced features guarantee productivity and efficiency improvements over conventional test equipment

·     Meets most relevant safety standards for flash/hipot testing

·     Test outputs are fully isolated from ground making this the safest tester on the market

·     Saves up to 6000 test results electronically and can print labels and test reports

·     Can be used with a barcode scanner to automate and de-skill the test process

·     Can be programmed using a barcode scanner making it ideal for ISO quality systems

·     Meets requirements for traceabilty of equipment and results in accordance with international approvals agencies (UL and CSA)

·     Can be configured for single button operation with simple PASS/FAIL indication

·     High performance, ideal for lab or audit environment conformance testing

·     Electrically isolated outputs not only protect the user but protect other personnel within the test environment

 

 

 

HAL Scan Flash/Hipot Tester

·     Advanced features guarantee productivity and efficiency improvements over conventional test equipment

·     Meets most relevant safety standards for flash/hipot testing

·     5 unique pairs of test outputs are fully isolated from ground making this the safest tester on the market - mutiple test points can be automated into one test sequence

·     Saves up to 6000 test results electronically and can print labels and test reports

·     Can be used with a barcode scanner to automate and de-skill the test process

·     Can be programmed using a barcode scanner making it ideal for ISO quality systems

·     Meets requirements for traceabilty of equipment and results in accordance with international approvals agencies (UL and CSA)

·     Can be configured for single button operation with simple PASS/FAIL indication

·     High performance, ideal for lab or audit environment conformance testing

·     Electrically isolated outputs not only protect the user but protect other personnel within the test environment

 

 

 

HAL Combi 4-in-1 Electrical Safety Tester

·     Available tests: AC and DC Flash/Hipot, Earth/Ground Bond, DC Insulation

·     Advanced features guarantee productivity and efficiency improvements over conventional test equipment

·     Meets most relevant safety standards for flash/hipot testing

·     Earth/ground bond test can be performed at 40A to meet UL and CSA requirements

·     Test outputs are fully isolated from ground making this the safest tester on the market

·     Saves up to 6000 test results electronically and can print labels and test reports

·     Can be used with a barcode scanner to automate and de-skill the test process

·     Can be programmed using a barcode scanner making it ideal for ISO quality systems

·     Meets requirements for traceabilty of equipment and results in accordance with international approvals agencies (UL and CSA)

·     Can be configured for single button operation with simple PASS/FAIL indication

·     High performance, ideal for lab or audit environment conformance testing

·     Electrically isolated outputs not only protect the user but protect other personnel within the test environment

 

 

Sentinel Hipot/Flash Tester

·     Meets relevant safety standards for Flash testing

·     PLC Interface for Start, Stop and test result output

·     Ideal as part of automated test system or standalone

·     Straight-forward simple operation

·     Store up to 6 test sequences

 

 

 

A203K Hipot/Flash/Dielectric Withstand Tester

·     Simple to use

·     Clear, easy to read, panel meters

·     Rugged design

·     Versatile

·     Test probes supplied

·     Adjustable voltage, 0-15 kV a.c. from a 500VA transformer source

·     Test voltage displayed on analogue meter scaled 0-15kV a.c. 5mA safety trip

·     Over current or flash-over dielectric breakdown indicated by maintained lamp and audible alarm

·     Fault indication reset by safety button

·     Complete with pair of sprung shrouded safety test probes

 

 

 

 

 

A203H/TL Hipot/Flash/Dielectric Withstand Tester

·     Simple to use

·     Clear, easy to read, panel meters

·     Rugged design

·     Versatile

·     Adjustable voltage, 0-10 kV a.c. from a 250VA transformer source

·     Twin analogue meter displays

·     Applied Voltage - scaled 0-10 kV a.c.

·     Total Leakage - scaled 0-5mA

·     5mA Safety Trip

·     Over current or Flash breakdown indicated by maintained lamp and audible alarm

·     Fault indication reset by safety button

·     Complete with pair of sprung shrouded safety test probes to test output via a pair of sprung shrouded safety test probes

 

 

 

A203ES Flash Tester

·     Simple to use

·     Clear, easy to read, panel meters

·     Rugged design

·     Versatile

·     Test probes supplied

·     Special flash test set for laboratory type tests such as EN 60335-1 etc

·     Adjustable voltage, 0-5kV a.c. from a 500VA transformer source

·     Twin analogue meter displays

·     Applied voltage - scaled 0-5kV a.c.

·     Total Leakage - scaled 0-5mA (read as x10 & x100 with higher trip levels selected)

·     Key switch selectable trip levels of 5, 25 or 125 mA

·     Over current or Flash breakdown indicated by maintained lamp and audible alarm

·     Fault indication reset by safety button

·     Push button trip by-pass (burn-out) facility for fault tracing

·     Complete with pair of sprung shrouded safety test probes

 

 

(back to top)

 

 

 

Hire Sector Testers

 

 

SafeCheck 8 Electrical Safety PAT Tester

·     Stores up to 6000 test results in flash secure memory

·     Has built in pre-configured tests for Class I, Class II and extension lead/power cord

·     Can be automated with a barcode scanner to enter user, location, asset/SN, and other text fields

·     Test sequences can be entered from barcodes

·     Earth/Ground Bond test

·     Flash/hipot dielectric withstand test

·     DC Insulation test

·     Full function run test

·     Leakage test

·     Continuity and polarity test

·     Visual inspection test field included

·     Flash memory stores results without mains supply

·     Unit is supplied with power cord, test probes and instruction booklet

 

 

B255 Comprehensive Power Tool & Appliance Safety Tester

·     Simple clear controls

·     Unsurpassed reliability and value

·     Provides a full suite of electrical safety tests including Earth/ground bond, hipot/flash testing load/run and leakage testing

 

 

 

A252 Compact Portable Electrical Safety Tester

·     Simple and straight forward to use

·     For the safety testing of office equipment, power tools and appliances

·     Test both 110 and 240 volts appliances

·     Ideal for applications where run test is unnecessary

·     Audio visual indication of results

·     Supplied with High quality Test Probes

 

 

(back to top)

 

 

 

Testers for the Lighting Industry

 

 

Safetest Luminaire Electrical Safety Tester

·     Meets all the requirements of “The Lighting Association Code of Practice” and international standard IEC 598 (incorporating BSEN 60598) and UL1598 (C22.2 No.250.0)

·     Offers choice of AC Hipot/Flash test or DC Insulation test to meet the new requirement for testing electronic ballasts and switchgear where traditional Flash/Hipot testing cannot be used

·     Provides Earth Bond, Insulation Resistance, Flash Test, Run Test, Continuity & Polarity tests

·     Electronic storage of test results

·     Fast production testing using preconfigured test sequence capability

·     Single button operation with simple PASS/FAIL indication

·     Password protection

 

 

 

G2000 Lighting Electrical Safety Tester

·     Meets all the requirements of “The Lighting Association Code of Practice” and international standards such as IEC598 (incorporating EN60598)

·     Performs Continuity, Polarity, Light up, Earth Bond and Flash Test for Class I and Class II lighting products

·     Simple straightforward operation

·     Output box incorporating UK 13A and Euro sockets

·     Suitable for testing low energy fittings

·     Provides the complete solution for electrical safety testing of lighting products

 

 

(back to top)

 

 

 

Ground / Earth Bond Testers

 

 

B433R Earth Bond Tester

·     Simple clear logical user interface

·     Test current of 25A a.c. into a 0.1Ω impedance

·     Earth continuity/ground bond impedance is displayed via a meter ranged from 0 to 1Ω, with colour coded bands for 0 to 0.1Ω (green), 0.1Ω to 0.5Ω (yellow) and 0.5Ω to 1Ω (red) to simplify operator use when correlating result to most international test standards pass fail criteria

·     Supplied with high quality Clare trademark No-Burn high current earth/ground bond probe – prevents visual burn marks to product during application of the test current

·     Built in test pass/fail threshold is indicated by green LED which is integral to the No-Burn test probe, and illuminates during test application – this facilitates remote working when the operator is out of sight of the test instrument, for example behind a large product under test

·     Rugged design suitable for industrial use

 

 

(back to top)

 

 

 

Wiring Analysers

 

 

Horizon II Wiring Analyser

·     Fully updated Windows-based user environment

·     Colour touch-screen

·     Real-time temperature and humidity monitoring

·     Expanded I/O

·     Flash disk data storage

·     Improved ergonomics

·     Onscreen help

·     Enable 128-point testing with modular expansion capability up to 1024 points capable of switching 1A and hipot testing up to 1500 VDC and/or 1067 VAC

·     Standard test capability includes fault location, automatic product learning, component detection and real-time intermittent open/short detection

 

 

 

A320 Power Cord Tester

·     Earth / Ground bond test

·     Line and Neutral Continuity test

·     Polarity test

·     Tests are automatically applied in a timed sequence with lamp indication of test status

·     ‘Test complete’ and ‘Pass’ lamps will indicate a satisfactory test

·     ‘Fail’ lamps, one for each test, will indicate specific faults

·     For setting up and calibration purposes a Manual Mode is also provided

 

 

(back to top)

 

 

 

Electrical Safety Test Enclosures

 

·     Eliminates all risk of electric shock to operator from direct contact with product during electrical testing

·     Enables test process to be ‘de -skilled' as test connection can be automated within test enclosure

·     Can be used as part of a test system to enable full compliance with EN 50191 standard

·     Increases productivity by automating test connections to product under test within enclosure

·     Minimizes physical space requirement for electrical safety testing - key within production environments

·     Test PASS/FAIL marking devices can be incorporated within the test enclosure

·     Faulty products can be destructively rendered unusable by automation within the enclosure

·     Conductive foam nests can be safely incorporated for testing class II double insulated products

·     Multiple products can be tested within the enclosure by incorporating internal switching automation

 

Enclosures

 

Test Enclosure 40x40x40cm

 

Test Enclosure 50x50x50cm

 

 

Test Enclosure 40x40x100cm

 

 

Test Enclosure 60x60x60cm

 

 

Test Enclosure 200x100x100cm

 

 

(back to top)

 

 

 

 

 

˝ Home ˝ Electrical Test Equipment ˝ Medical Electrical Safety Analyser ˝ Precision Test Equipment ˝ Motor Protection Relays ˝ Level Controller ˝

˝ Cable Locator ˝ Electromotors ˝ Generators ˝ Safety Interlocks ˝ Switchgear ˝ Transformer ˝ AC Voltage Stabilisers ˝ Load Banks ˝

˝ Laboratory Power Supply ˝ Power Transmission Equipments ˝ Transformer Oil Filtering Machine ˝ Fuse Links ˝ Cutouts ˝

˝ Gas Leak Detector ˝ Cable Jointing Kit ˝ Filter Element ˝ Vibration & Pneumatic Controls ˝

 

 

 

West Asia Trading & Engineering Pte Ltd

No. 1 Kim Keat Lane

Singapore 328858

Tel: +(65) 6250 5676

Fax: +(65) 6252 9890

E-mail: westasia@singnet.com.sg